How to choose your wheels for inline figure skating ?
The choice of your wheels to practice inline figure skating depends on several parameters: the ground on which you skate, your weight, your specialty. So many criteria that must be refined to choose the right model...
Par Priscillia ARGUIMBAU-BOATTO

Several parameter to take into account to choose your inline figure skating wheels
First of all, I invite you to read this article to understand the general anatomy of an inline roller wheel.
What diameter can I choose?
The diameter of wheels is often chosen by default and must generally remain consistent with the size of frame that we wear. The manufacturers also make documents available about that. Some wheel models only fit on the largest frames (usually above a size 38 EU).
The size of the wheels can’t be really modified, because the shape of our frame and the placement of the wheels does not allow all combinations, otherwise the wheels can touch between them. Synergy models (Snow white) or Zero (from roll line) in 86A only go on large frames, in fact, impossible to find them in 64 or 68mm. Which is very unfair for small feet skaters (no matter the level).
The four most used diameters are:
- 64mm
- 68mm
- 70mm
- 72mm
- (some even go up to 76mm)
Correspondence table between boot size, frame size and wheel size for inline figure skating (Roll Line)
Size of the boot (mm) | 215 to 220 | 225 to 230 | 235 to 240 | 245 to 250 | 255 to 260 | 265 to 270 | 275 to 280 | 285 to 290 | 295 to 300 |
Size of frame (inches) | 8′ | 8,5′ | 9′ | 9,25′ | 9,75′ | 10′ | 10,25′ | 10,75′ | 11,25′ |
Size of frame (mm) | 203 mm | 215 mm | 228 mm | 235 mm | 247 mm | 254 mm | 260 mm | 273 mm | 279 mm |
Max. diameter (mm) | 64 mm | 64 mm | 64 mm | 64 mm | 72 mm | 76 mm | 76 mm | 76 mm | 76 mm |
Snow White frames and EDEA or Risport boots
Snow White Size | 10′ | 11′ | 12′ | 13′ | 14′ | 15′ | 16′ | 17′ | 18′ | 19′ | 20′ |
Boot size | 205 to 210 | 215 to 220 | 225 to 230 | 235 to 240 | 245 to 250 | 255 to 260 | 265 to 270 | 275 to 280 | 285 to 290 | 295 to 300 | 305 to 310 |
European size | 31 EU | 32-33 EU | 34 EU | 35-36 EU | 37 EU | 38-39 EU | 40 EU | 41-42 EU | 43EU | 44-45 EU | 46-47 EU |
Wheel size | 64 mm | 64 mm | 64 mm | 64 mm | 68 mm | 72 mm | 72 mm | 72 mm | 72 mm | 72 mm | 72 mm |
Which wheel profile should I choose for inline figure skating?
The idea is to have fairly soft wheels that have a good grip (more and more skaters are between 84 A and 76 A. Figure skating, unlike hockey requires a lot of precision and as much power, but also requires good stability. Certain technical elements such as spins (we turn on an axis on the ground; on a single wheel) require a lot of power, stability but must be hard enough to allow us to turn for a long time. Then, it’s interesting to cross different hardness of wheels to be effective on all the technical elements.
However, it is your choice as skater. Some keep the same hardness on the whole frame. This is a matter of feeling and personal experience. Quad figure skaters also use this method. As the discipline is still quite young, only few skaters are experimenting with the wheels combinations.
Yi Fan Chen, for example, chose to have a different hardness on the center wheel. Antonio Panfili or Chiara Censori have chosen to have a different hardness on the front wheel, while Angela Martin Mora keeps the same hardness on the whole frame.
It all depends on what kind of floor you’re going to skate !
The slippery the ground, the softer the wheels should be and have a good grip, it depends on your skating technique and your weight too. For a fairly smooth parquet for example, I would recommend a hardness between 84 A and 76A.
You can try to skate with roller hockey wheels. Be careful because some have either a round profile or an elliptical profile. A round profile provides more stability, but will be slower than an elliptical profile. Not all hockey models are compatible with the frame, make sure you have the same cores and the same axis width.
An article on the maintenance of the wheels
Here is a table of the wheels currently existing and specific to inline figure skating :
Photo |
Brand / model |
Hardness | Available diameters |
Floor type |
Price |
Comment |
|
Harmony Sports / Geneva |
Not available | 68mm | Indoor | $60 for 6 wheels |
Mostly used by skaters equipped with Pic Skates frames. The hardness of the well is unknown, but it »s quite hard (more than Snow White Champ. wheels) |
|
Harmony Sports / Axel 6.0 |
83A | 70mm | Indoor | $ 37,5 for 6 wheels |
These wheels have an elliptical profile. The chemical formula has been thought to reduce the loss of grip on landing. |
|
Snow White / Synergy |
89A | 72mm only |
Indoor / outdoor | $42 for 6 wheels |
|
|
Snow White / Champ |
84A | 64mm 68mm 72mm |
Indoor | €31,95 for 6 wheels |
BASF SHR (Super High Rebound) polyurethane, a special formula created by the Wheel laboratory in California (United States). The rebound percentage reaches 80% to compensate for the absorption of shocks by the parquet. |
|
Speed Max | 89A | 64mm 68mm 72mm |
Outdoor | € 32,95 for 6 wheels |
The ultimate outdoor wheel! Perfect even on the worst concrete floor ! |
|
Snow White / Spiral |
84A | 64mm 68mm 72mm |
Indoor | € 32,95 for 6 wheels |
This new 2019 Snow White wheel now replaces the old Orange Champ. wheel. |
|
Roll Line / Zenith |
78A | 72mm | Indoor | €37,50 for 6 wheels |
Normally used for inline hockey, these wheels are currently used by the best skaters. Unfortunately, Roll Line has stopped manufacturing. |
|
Roll Line / Zenith |
74A | 72mm | Indoor | €37,50 for 6 wheels |
Used for inline hockey also, they are also used by figure skaters in addition to the Zenith in 78A. Unfortunately, Roll Line has stopped their manufacture. |
|
Roll Line / Zero |
82A | 64 mm 72 mm 76 mm |
Indoor | €42,95 for 6 wheels |
A new model available since September 2019. A specific wheel design by Roll Line for inline figure skating.
|
|
Roll Line / Zero |
86A | 72mm 76mm |
Indoor / outdoor | €42,95 for 6 wheels |
A new model available since September 2019. A specific wheel design by Roll Line for inline figure skating. |
![]() |
G.H. Golden Horse |
86A | 72mm 76mm |
Indoor / outdoor | A core with 5 spiral branches for a versatile wheel. | |
![]() |
G.H. Golden Horse |
80A | 62mm 66mm |
Indoor | The core of this wheel reminds the freeskate models such as the famouse Hyper Concrete. | |
![]() |
Marque inconnue | 89A | 72mm 76mm |
Outdoor | $29 for 6 wheels | Une marque inconnue mais avec un design ultra-classique de noyau à 5 branches en étoile, très courant dans les anciennes roues Hyper des années 1990/2000. La dureté élevée la destine plutôt à un sol lisse et roulant. |
![]() |
STD Starlight |
89A | 68mm | Outdoor | €30 for 6 wheels | Round profile |
![]() |
STD Starlight | 84A | 68mm | Indoor | €30 for 6 wheels | Round profile |
![]() |
Tron MegaHertz |
82A | 64mm 68mm 72mm 76mm 80mm |
Indoor | $3 per wheel | The datasheet on the WebSite of the manufacturer says: Slot Core Technology increases rebound and overall grip. Test Proven Urethane. High rebound urethane for superior grip and wear. Great performance at a reasonable price. |